98-08901C68-O 95
AT Commands Reference
Read Command
The Read command returns the currently selected memory, number of used locations and total number of locations in the
memory.
Test Command
Test command returns the supported storages as a compound value.
The following table shows the +CPBS parameters.
Command Response/Action
+CPBS? +CPBS: <storage>[,<used>,<total>]
Command Response/Action
+CPBS=? +CPBS: (list of supported <storage>s)
OK
Table 32. +CPBS Parameters
<Parameter> Description
<storage> Supported phone lists and their storage IDs
DC g20 dialed calls list
(+CPBW may not be applicable for this storage).
EN SIM (or g20) emergency number
(+CPBW is not be applicable for this storage).
FD SIM Fixed dialing phone book.
LD SIM Last dialed phone book (the same as "DC").
MC g20 missed (unanswered received) calls list
(+CPBW may not be applicable for this storage).
ME g20 phone book.
MT Combined g20 and SIM phone book.
AD Combined SIM and g20 phone book
ON SIM (or g20) own numbers (MSISDNs) list
(reading of this storage may be available through
+CNUM also).
RC g20 received calls list
(+CPBW may not be applicable for this storage).
SM SIM phone book.
TA TA phone book.
QD Quick Dial phone book.
DD Quick Dial phone book.
The default value is AD.
<used> Integer type value indicating the number of used locations
in the selected memory.
To Next Page
Loading...
