Motorola g20 - Table 42. +CCLK Parameters

AT Commands Reference
116 98-08901C68-O
Test Command
The Test command returns valid parameters for the +CCLK Set command.
The following table shows the +CCLK parameters.
Example
AT+CCLK=?
+CCLK: "99/12/31,23:59:59,(-47-+48)"
OK
AT+CCLK="00/12/25,08:30:00"
OK
AT+CCLK?
+CCLK: "00/12/25,08:30:05-08"
AT+CCLK="01/07/04,21:00:12+43"
OK
AT+CCLK?
+CCLK: "01/07/04,21:00:34+43"
OK
Command Response/Action
+CCLK=?
Table 42. +CCLK Parameters
<Parameter> Description
<time> ASCII string of format
yy/MM/dd,hh:mm:ss±zz
or
yy/MM/dd,hh:mm:ss
yy 2-digit year [1970-2069]
MM 2-digit month [01-12]
dd 2-digit day of month [00-31]
hh 2-digit hour [00-23]
mm 2-digit minute [00-59]
ss 2-digit seconds [00-59]
zz (optional) time zone offset from GMT, in
quarter-hours [-47...+48]. If this value is not
specified, the time zone offset will default to the
value currently stored in the g20.