Motorola g20 - Table 48. +MEGA Parameters

AT Commands Reference
124 98-08901C68-O
Read Command
The following table shows the +MEGA parameters.
Example
AT+MEGA="4252833433"
OK
AT+MEGA?
+MEGA: "4252833433"
OK
4.5.1.6 +CSDH, Show Text Mode Parameters
This command controls whether detailed header information is shown in the text mode result code. The result code for +CMGR
and +CMGL commands for SMS-DELIVER and SMS-SUBMIT includes <sca>, <tosca>, <fo>, <vp>, <pid>, <dcs>, <length>,
<toda>, and <tooa> fields in the detailed header information. The result code for +CMGR commands for SMS COMMANDs
includes <pid>,<mn>,<da>,<toda>,<length>, and <cdata> fields in the detailed header information.
Set Command
Read Command
The Read command reads the current value for <show>.
Command Response/Action
+MEGA?
Table 48. +MEGA Parameters
<Parameter> Description
<ega> Email Gateway Address, represented by a quoted string.
Refer to “+CSCA, Service Centre Address”, page 121, for
a list of permitted characters.
Command Response/Action
+CSDH=<show>
Command Response/Action
+CSDH? +CSDH: <show>