AT Commands Reference
130 98-08901C68-O
4.5.1.11 +MMGL, Motorola List Messages
This command is similar to +CMGL, except that no change is made to the read status of the message(s). Also, a new <stat>
selection "HEADER ONLY" is defined, which can be used to query the g20 for a list of message headers without attendant
message data.
Set Command
Read Command
The Read command for +MMGL is not defined, and therefore is not supported by the g20. The g20 returns an error.
Test Command
The following table shows the +MMGL parameters.
Command Response/Action
+MMGL=
<any value but HEADER
ONLY>
+MMGL= "HEADER ONLY"
+MMGL: <index>,<stat>,<oa/da>,<CR><LF><data>
<CR><LF>
+MMGL: <index>,<stat>,<oa/da>,<CR><LF>
Command Response/Action
+MMGL=? +MMGL: (list of supported <stat>s
Table 53. +MMGL Parameters
<Parameter> Description
<index> Index of the message in the SMS memory.
<stat> REC UNREAD Received unread message (Default).
REC READ Received read message.
STO UNSENT Stored unsent message.
STO SENT Stored sent message.
HEADER ONLY All messages
<oa/da> Originating/destination address value in string format.
When the email SMS feature is available, this address is a
string that contains one or more MIN numbers and/or email
addresses, separated by a space. Otherwise, this field
contains a single MIN number.
To Next Page
Loading...
