Motorola g20 - Table 60. +CRLP Parameters

AT Commands Reference
138 98-08901C68-O
Read Command
Test Command
The following table shows the +CRLP parameters.
Example
AT+CRLP=?
+CRLP: (010-061),(010-061),(048-255),(006-010)
OK
AT+CRLP?
+CRLP: 061, 061, 048, 006
OK
Command Response/Action
+CRLP? +CRLP= <iws>,<mws>,<T1>,<N2>
OK
or:
+CME ERROR: <err>
Command Response/Action
+CRLP=? +CRLP= (list of supported <iws>s), (list of supported
<mws>s), (list of supported <T1>s), (list of supported
<N2>s)
OK
or:
+CME ERROR: <err>
Table 60. +CRLP Parameters
<Parameter> Description
<iws> IWF to MS window size.
The default value is 61.
<mws> MS to IWF window size.
The default value is 61.
<T1> Acknowledgement timer T1.
The default value is 48.
<N2> Retransmission attempts N2 in integer format (refer to
GSM 04.22 [18] subclause 5.4.3)
The default value is 6.