Motorola g20 - Table 83. +CLCK Parameters

98-08901C68-O 179
AT Commands Reference
The following table shows the +CLCK parameters.
Example
AT+CLCK=?
+CLCK: ("SC","AO","OI","OX","AI","IR","AB","AG","AC","FD")
OK
AT+CLCK="SC",2
+CLCK: 0
OK
Table 83. +CLCK Parameters
<Parameter> Description
<fac> SC SIM Card PIN setting
<mode> 0 Disable PIN
1 Enable PIN)
FD SIM Fixed Dialing memory setting
<mode> 0 Disable fixed dialing feature
1 Enable fixed dialing feature)
AO BAOC (Bar All Outgoing Calls)
OI BOIC (Barr Outgoing International Calls)
OX BOIC-exHC (Barr Outgoing International Calls
except to Home Country)
AI BAIC (Barr All Incoming Calls)
IR BIC-Roam (Barr Incoming Calls when Roaming
outside the home country)
AB All Barring services (applicable only for <mode>=0)
AG All outgoing barring services (applicable only for
<mode>=0)
AC All incoming barring services (applicable only for
<mode>=0)
<passwd> String type, 4-8 character password
<mode> 0 Unlock
1Lock
2 Query status (<passwd> does not apply)
<class> Sum of integers, each representing a class of information
<class>. Only applies to call barring related facilities.
1 Voice (telephony)
2 Data (refers to all bearer services)
4 Fax (facsimile services)
The default value is 7.
<status> 0 Inactive
1Active