Motorola g20 - Table 107. +CGQREQ Parameters

AT Commands Reference
218 98-08901C68-O
A special form of the Set command, +CGQREQ= <cid>, causes the requested profile for context number <cid> to become
undefined.
Read Command
The Read command returns the current settings for each defined context.
Test Command
The Test command returns values supported as a compound value. If the MT supports several PDP types, the parameter value
ranges for each PDP type are returned on a separate line.
The following table shows the +CGQREQ parameters.
Command Response/Action
AT+CGQREQ=[<cid>
[,<precedence> [,<delay>
[,<reliability.> [,<peak>
[,<mean>]]]]]]
OK
or:
+CME ERROR: <err>
Command Response/Action
AT+CGQREQ? +CGQREQ: <cid>, <precedence>, <delay>,
<reliability>, <peak>, <mean>
OK
or:
+CME ERROR: <err>
Command Response/Action
AT+CGQREQ=? +CGQREQ: <PDP_type>, (list of supported
<precedence>s), (list of supported <delay>s), (list of
supported <reliability>s), (list of supported <peak>s),
(list of supported <mean>s)
OK
or:
+CME ERROR: <err>
Table 107. +CGQREQ Parameters
<Parameter> Description
<cid> A numeric parameter that specifies a particular PDP
context definition.
<precedence> A numeric parameter that specifies the precedence class.
<delay> A numeric parameter that specifies the delay class.