Motorola g20 - Table 121. +MTKE Parameters

AT Commands Reference
238 98-08901C68-O
• In the second step, an unsolicited result +MTKP (Motorola ToolKit Proactive) is sent by the g20 in order to indicate the
customer application, command type the SIM Application Toolkit is running on the SIM card, and the relevant information.
• In the third step, the customer application uses the AT+MTKP command to respond to the SIM ToolKit command, given
by +MTKP.
4.15.1.1 +MTKE, Motorola ToolKit Enable
This command enables/disables the SIM ToolKit functionalities.
Set Command
The Set command tells the g20 in which mode to work.
Read Command
The Read command returns the current values.
Test Command
The Test command returns supported values as a compound value.
The following table shows the +MTKE parameters.
Command Response/Action
+MTKE=<Enable> OK
or:
+CME ERROR: <err>
Command Response/Action
+MTKE? +MTKE: <State>
Command Response/Action
+MTKE=? +MTKE: (0-1)
OK
Table 121. +MTKE Parameters
<Parameter> Description
<State> Indicates the state of the SIM ToolKit
0 Deactivate the SIM ToolKit functionalities
1 Activate the SIM ToolKit functionalities
The default is 0.