Motorola g20 - Table 122. +MTKP Command Types; Table 123. +MTKP Parameters

AT Commands Reference
240 98-08901C68-O
The following table shows the + MTKP Command Types.
The following table shows the +MTKP parameters.
Note
The Cmd Type numbers refer to the proactive command which was sent from the SIM (This is the
ProactiveCmdType field). Numbers 4, 5, 6 do not exist.
For "get inkey" and "get input", a one-minute timer is set, and any response for these unsolicited commands after
one minute is not accepted.
Table 122. +MTKP Command Types
Cmd Type Description Responses
1 Provides data about the "Display text" pro-
active command.
+ MTKP: <ProactiveCmdType>, <Priority>,<Text>
2 Provides data about the "Get Inkey" pro-active
command.
+ MTKP:
<ProactiveCmdType>,<ResponseType>,<HelpInfo>[,
<Text>]
3 Provides data about the "Get Input' pro-active
command.
+ MTKP: <ProactiveCmdType>,<ResponseType>
,<SecurityMode>,<MinLen>,<MaxLen>,
<HelpInfo>[,<Text>]
5 Provides data about 'Play Tone' pro-active
command.
+ MTKP: <ProactiveCmdType>,
<ToneType>[,<TimeUnit>,<TimeInterval>,<Text>]
9 Provides data about the 'Send SMS' pro-active
command.
+ MTKP: <ProactiveCmdType>, <Text>
10 Provides data about the 'Send SS' pro-active
command.
+ MTKP: <ProactiveCmdType>,<Text>
12 Provides data about the 'Setup call' pro-active
command.
+ MTKP: <ProactiveCmdType>,
<Type>,<CalledNb>,<Redials>,<Text>
13 Provides data about the 'Refresh' pro-active
command.
+ MTKP: <ProactiveCmdType>,<RefreshType>
20 Provides data indicating the timeout (get inkey,
get input and select item)
+ MTKP: <ProactiveCmdType>
Table 123. +MTKP Parameters
<Parameter> Description
ProactiveCmdType=1 (Display Text)
<Priority> 0 Normal priority of display.
1 High priority of display.
<Text> Text information in ASCII format.