Motorola g20 - Table 124

AT Commands Reference
242 98-08901C68-O
<TimeUnit> 0 Minutes.
1 Seconds.
2 Tenths of seconds.
<TimeInterval> (1-255) Time required expressed in units.
<Text> Text information in ASCII format.
Values when ProactiveCmdType=9 (Send SMS)
<Text> Text information in ASCII format.
Values when ProactiveCmdType=10 (Send SS)
<Text> Text information in ASCII format.
Values when ProactiveCmdType=12 (Setup Call)
<Parameter> 0 Set up call, but only if not currently busy on another
call.
1 Set up call, putting all other calls (if any) on hold.
2 Set up call, disconnecting all other calls (if any).
<CalledNb> Called number in ASCII format.
<Redials> 0 Redial allowed.
1 Redial not allowed.
<Text> Text information in ASCII format
Values when ProactiveCmdType=13 (Refresh)
<RefreshType> 0 SlM initialization and full file change notification.
1 File change notification.
2 SIM initialization and file change notification.
3 SIM initialization.
4 SIM reset.
Table 124.
<Parameter> Description
<CmdType> 0 Session ended by user.
1 Response given by the user.
2 Help information required by user.
Table 123. +MTKP Parameters (Continued)
<Parameter> Description