Motorola g20 - Tcp;Ip; Table 127. +MTKC Parameters

AT Commands Reference
246 98-08901C68-O
4.15.1.5 +MTKC, Motorola ToolKit Call Control
This command identifies the CALL CONTROL and SMS CONTROL responses when the customer application makes an
outgoing call or an outgoing SMS, if the call control facility is activated. This also applies to SS calls.
This is an unsolicited result.
The following table shows the +MTKC parameters.
4.15.2 TCP/IP
4.15.2.1 +MIPCALL, Create a Wireless Link
This command sets up a PPP (Point to Point Protocol) connection with the GGSN (Gate GPRS Support Node), and returns a
valid dynamic IP for the g20.
Set Command
<Help Info> 0 No help available
1 Help available
Command Response/Action
AT+MTKC +MTKC: <CCResult>[,<Number>]
Table 127. +MTKC Parameters
<Parameter> Description
<CCResult> 0 Control response not allowed.
1 Control response with modification.
<Number> Called number or SS String in ASCII format.
Command Response/Action
+MIPCALL= <Operation> [<APN>,
[<User name>, <Password>]]
OK
+MIPCALL: <local IP-address>
or:
ERROR: <err>
+MIPCALL: 0
Table 126. +MTKM Parameters (Continued)
<Parameter> Description