Motorola g20 - Table 131. +MIPSETS Parameters

AT Commands Reference
252 98-08901C68-O
The following table shows the +MIPSETS parameters.
Example
at+MIPSETS=1,340 //Asks the g20 to accumulate 340 bytes on socket 1 prior to sending (socket should be
activated by the +mipopen command)
+MIPSETS: 0
OK
at+MIPSETS=1,200 //Asks the g20 to accumulate 200 bytes on socket 1 prior to sending (socket should be
activated by the +mipopen command)
+MIPSETS: 0
OK
at+MIPSETS=2,400 //Asks the g20 to accumulate 400 bytes on socket 2 prior to sending
+MIPSETS: 0
OK
at+mipsets=?
+MIPSETS: (1-4),(1-1500)
OK
at+mipsets?
+MIPSETS: 1 100 2 1500
OK
Table 131. +MIPSETS Parameters
<Parameter> Description
Size Size of the buffer
1 < size < 1500
The default value is 1500
Extended err 3 Operation not allowed