Using the Commands
282 98-08901C68-O
5.8.9 Call Control
1. First, the user makes a call.
2. The call number is sent to the SIM, which decides whether to change the number or not. If the call has been changed, the
new number is displayed on the terminal.
Figure 27. Call Control
Example
AT+MTKM //Displays the main menu
+MTKM: SIM Applications //Main menu title
+MTKM: 1,3,"BANK",0 //The main menu contains three items
+MTKM: 2,3,"SHOOPING",0
+MTKM: 3,3,"WEATHER",0
OK
AT+MTKM=1,3 //Item 3 in the main menu has been selected
OK //The Sel item menu has been sent from the SIM
+MTKM: 1," WEATHER" //Displays data about the WEATHER menu
The WEATHER menu contains two items
+MTKM: 1,2,"OVER THE WORLD",1
+MTKM: 2,2,"IN THE COUNTRY",0
AT+MTKM=1,1 Select Item 1.
OK
+MTKP: 3,0,0,4,4,0,"Enter Country name: //User is requested to enter country name
AT+MTKP=3,1,England //User enters the country
OK
+ MTKP: 1,0,"Weather in England is 5ºC" //Text is sent from the SIM
G20
TE
Call Control Request
Tx
Display CC info
STK Engine
3
3
ATD11111
2
ATD11111
ATD22222
1
4
(+MTKC)
Run STK app
To Next Page
Loading...
