Motorola g20 - Multi-Point Data Transfer Example

Using the Commands
284 98-08901C68-O
+MIPCLOSE=1 //Terminal closes the socket
+MIPCLOSE: 1
OK
+MIPCALL=0 //Terminal hangs up the link
OK
5.9.2 Multi-point Data Transfer Example
at+mipcall=1,"orange","test","test"
OK
+MIPCALL: 172.17.242.86
at+mipopen=1,1001,"172.17.238.44",1001,0
OK
+mipopen: 1,1
at+mipopen=2,1111,"172.17.238.44",1111,0
OK
+mipopen: 2,1
+MIPSETS=1,200 //Asking the g20 to accumulate 200 bytes on socket 1 prior to sending
+MIPSETS: 0
OK
+MIPSETS=2,400 //Asking the g20 to accumulate 400 bytes on socket 2 prior to sending
+MIPSETS: 0
OK
+MIPSEND=1,"444444"
+MIPSEND:1,1497
OK
+MIPSEND=2,"DD" //Passing data to the g20 socket 2
+MIPSEND:2,1499
OK