Motorola g20 - Figure 29. MUX Frames

98-08901C68-O 289
Using the Commands
5.11.1.4 Receiving Data Service
The API Receiving Data Service MIP and MUI procedures are as follows:
•MIP:
1. Use API BYTE TS0710_rx_handler_api (BYTE* rx_string, WORD len_rx_string) for unpack frames.
2. Use TS0710_DLC_APP_rx_handler_api (MUX_CHANNEL dlc,BYTE bytes_in_queue) for reading the arrival data
from the channel buffer void.
• MUI: Create data unpack.
5.11.1.5 MUX Service Test, MSC, FC, and so on (All to Control Channel)
•MIP:
1. Void ts_0710_send_CLD_cmd (DLC_CMD_OR_RESP type).
2. Void ts_0710_send_test_req (BYTE* test_DATA, WORD test_DATA_length).
3. Void ts_0710_send_Channel_DTR_status (BYTE DTR_Signal, BYTE dlc).
4. Void ts_0710_send_test_req (BYTE* test_DATA, WORD test_DATA_length).
5.11.1.5.1MUX Frames
Figure 29. MUX Frames
Note
The terminal is the initiator.