98-08901C68-O 297
6. TOOLS
6.1 PC LOADER
6.1.1 Overview
6.2 PC DRIVER
6.2.1 Overview
g20 can be used as a PC external modem for fax communication and for performing GPRS packet data connections. The g20
USB driver file is required for running a terminal application on the PC. The WinFAX application with the Standard 19200 bps
Modem driver is recommended for fax connection. The GPRS Manager application with the Motorola Serial GPRS P2K 57.6
Kbps driver is recommended for GPRS packet data connections.
6.2.2 Fax Communication by Standard 19200 bps Modem
To install the modem driver, follow the procedure below:
1. From the Control Panel, select Modems > Add Modem.
2. Select "Don't detect my modem" and click Next.
3. Select "Standard 19200 bps modem" and click Next.
4. Select the valid com port.
5. Click Finish.
To configure the modem in WinFAX, follow the procedure below:
1. Run WinFAX.
2. Select Tools > Program Setup > Modems and Communications Devices > Properties.
3. Set the standard 19200 bps modem to Active.
4. Click Next and select CLASS 1 (Hardware Flow Control) > Next > Finish, Set Default (or other) > OK.
5. In the Modem and Communications Devices Properties window, click Properties.
6. In General > Communications port, set the COM port to which the modem is connected, and initialize it to 19200 bps.
To Next Page
Loading...
