Motorola g20 - Page 33

98-08901C68-O 19
Product Features
+CBST This command selects the bearer service and the connection element to be used
when data calls are originated.
77
O This command returns a phone to the Online Data mode and issues a CONNECT or
CONNECT <text> result code.
80
+COLP This command refers to the GSM supplementary service COLP, Connected Line
Identification Presentation, which enables a calling subscriber to get the connected
line identity (COL) of the called party after setting up a mobile originated call.
80
Call Status Messages
+CPAS This command returns the current activity status of the g20, for example, call in
progress, or ringing.
84
+CLCC This command returns a list of all current g20 calls and their statuses, and also
enables/disables the unsolicited indication of the call list.
86
+CAOC This command enables the subscriber to get information about the cost of calls. 89
Phone and Date Books
Directory Access Commands
+CPBS This command selects the memory that is to be used for reading and writing entries
in g20s that contain more than one phone book memory.
94
+CPBR This command recalls phone book entries from a specific location number, or from a
range of locations.
96
+MPBR This command recalls phone book entries from a specific location number, or from a
range of locations.
98
+CPBF This command enables the accessory to search the currently active phone book for
a particular entry, by name.
101
+MPBF This command enables the accessory to search the currently active phone book for
a particular entry, by name, and returns fields that are unique to Motorola phones.
103
+CPBW This command enables the accessory to store a new entry in the phone book, or
delete an existing entry from the phone book.
105
+MPBW This command enables the accessory to store a new entry in the phone book, or to
delete an existing entry from the phone book.
108
Table 3. AT Commands (Continued)
AT
Command
Description Page