98-08901C68-O 61
AT Commands Reference
Example
at+crc?
+CRC: 0
OK
at+crc=?
+CRC: (0,1)
OK
Example - RING/+CRING indication
(..Incoming Data Call..)
RING
RING
RING
at+crc=1 //Enable extended ring format
OK
+CRING: REL ASYNC
+CRING: REL ASYNC
ath
NO CARRIER
OK
4.3.3.7 +CLIP, Calling Line Identification
This command controls the Calling Line Identity (CLI) presentation indication to the terminal when an incoming call is detected
by the g20.This command allows the user to query the provisioning status of the CLI by the network and by the g20. The
command also allows the user to enable/disable the CLI presentation by the g20 to the terminal.
The +CLIP indication information varies depending on what is provided by the network and what information is stored in the
g20 phone book.
<type> Type of incoming call:
ASYNC CSD asynchronous transparent
REL ASYNC CSD asynchronous non-transparent
FAX Fax class 1
VOICE Normal voice
Table 18. + CRC Parameters (Continued)
<Parameter> Description
To Next Page
Loading...
