Motorola g20 - Table 25. +CBST Parameters

98-08901C68-O 79
AT Commands Reference
The following table shows the +CBST parameters.
Example
At+cbst=?
+CBST: (000,004,006,007,014,068,070,071,075),(000-001),(000-003)
OK
At+cbst?
+CBST: 7,0,1
OK
at+cbst=6
OK
at+cbst?
+CBST: 6,0,1
OK
Table 25. +CBST Parameters
<Parameter> Description
<speed> 0 Auto-bauding (automatic selection of the speed; this
setting is possible in case of 3.1 kHz modem and non-
transparent service)
4 2400 bps (V.22bis)
6 4800 bps (V.32)
7 9600 bps (V.32)
14 14400 bps (V.34)
68 400 bps (V.110 or X.31 flag stuffing)
70 4800 bps (V.110 or X.31 flag stuffing)
71 9600 bps (V.110 or X.31 flag stuffing)
75 14400 bps (V.110 or X.31 flag stuffing)
The default value is 7.
<name> 0 Data circuit asynchronous (UDI or 3.1 kHz modem)
1 Data circuit synchronous (UDI or 3.1 kHz modem)
The default value is 0.
<ce> 0 Transparent
1 Non-transparent
2 Transparent and non-transparent. Transparent
preferred
3 Transparent and non-transparent. Non-transparent
preferred
The default value is 1.