English
7
Test and use
Your phone and headset are now paired and ready to make and receive calls.
To confirm they are successfully paired and operating properly, place the
headset over your ear and make a call from your phone. You will hear ringing
from the headset.
After you have successfully paired your phone and headset, you do not need
to repeat these steps each time you use the headset.
Note: If desired, your headset can be restored to original factory settings.
This action will erase all pairing information stored in your headset. Thus,
you will need to pair your phone and headset again. To restore your headset
to original factory settings, press and hold both Volume and Call buttons at
the same time and slide Power switch to ON.
Using your headset: making & receiving calls
Your headset supports both Hands-free and Headset Profiles. Accessing
call functions depends upon which profile your phone supports. See your
phone’s user’s guide for more information.
Note: Some features are phone/network dependent.
Function Action
Receive a call Tap the call button
End a call Tap the call button
Reject a call Press and hold a volume button until the
ringer stops
Make a voice dial call Tap the call button and wait for voice
prompt
Answer second incoming call Use phone to answer (follow your phone’s
instructions)
To Next Page
Loading...
