5
③③
③③
③
PAIR
Your Headset
Before you can use your headset, you must pair (link) it with your phone.
Step A - PUT HEADSET IN PAIRING MODE
1
2
3
Ensure the headset is turned off (indicator light not blinking and headset
boom is closed).
Press and hold the Call button. After about 4 or 5 seconds, the indicator
light becomes steadily lit in magenta
Release the Call button and immediately open the headset boom. The
indicator light remains lit in magenta.
If the indicator light is flashing in blue or not steadily lit when opening the
headset boom, repeat steps 1 through 3 on this page.
To Next Page
Loading...
