75
CM200/CM300 & PM400 MOBILES
communicate clearly...
Hands-Free Accessories
AARMN4027A Visor Microphone
For use with external Push-to-Talk accessories.
Provides wind noise reduction.
Requires RLN4857A, RLN4856A or RLN4858A for operation.
RLN4856A Foot Switch with Push-to-Talk
Mounts to vehicle floor, must be used with AARMN4027A.
RLN4857A Pushbutton with Push-to-Talk
Must be used with AARMN4027A.
PTT button can be held or mounted in vehicle.
RLN4858A Gooseneck Mount with Push-to-Talk
Mounts to steering column, must be used with AARMN4027A.
RLN4836AR Emergency Foot Switch
Sends a signal to the base station and activates the microphone.
Mounting Accessories
GLN7324A Low-Profile Mounting Bracket
Dash or floor mount.
GLN7317A High-Profile Mounting Bracket
Offers more clearance between dash and radio.
Dash or floor mount.
HLN9227A 8-Inch Gooseneck Mounting Bracket
Mounts inside the forklift, height adjustable for each driver.
RLN4779A Key Lock Mounting Bracket
Requires key to lock/unlock radio in mounting bracket.
HLN8097A Removable Slide Mount
Allows users to remove radio when they leave the vehicle.
Alarm Accessories
HLN9328C External Alarm Relay Cable - Horn and Lights
GLN7282A Alarm Buzzer Kit
Installation Accessories
HKN4137AR 15 Amp, 2 Volt, 1-45 Watt Low-Power Cable
Cable used to connect the battery to the radio chassis.
HKN4191B 20 Amp, 12 Volt, 40-60 Watt High-Power Cable
Cable used to connect the battery to the radio chassis.
HLN9242A 16-Pin Accessory Kit with Expanded Connector
Kit allows modification of existing 16-pin connector for enhanced
reliability. Includes 9 wires with lugs, 1 connector housing,
16 crimping terminals, 2 tie straps and 1 extraction tool.
HKN9327BR Ignition Switch Cable with Housing Connector
Used to connect auto battery to radio, allows mobiles to turn on
with ignition. Requires HLN9242.
HLN8097A
Removable Slide Mount allows
users to remove radio when they
leave the vehicle.
GLN7317A
High-Profile
Mounting
Bracket
To Next Page
Loading...
