95
Creating Events
Enter a phone number, Direct Connect number,
or Talkgroup number. After the event is stored,
you can call this number.
When you are finished, press O.
3 Ifyouwanttoassignalocationtotheevent:
Select Location.
Enter the location. See “Entering Text” on page
33. -or-
Enter a phone number, Direct Connect number,
or Talkgroup number. After the event is stored,
you can call this number.
When you are finished, press O.
4 The start time automatically assigned to an event
is the beginning of the day. If you want to change
the start time or assign no start time:
Select Start.
Enter the start time you want. -or-
Press A under No Time to assign no start time.
5 Ifyouwanttoassignadurationtotheevent:
Select Duration.
Select the duration you want. -or-
Select Custom to enter a duration.
6 The date automatically assigned to an event is
the date that was highlighted or selected when
you began creating the event. To change the date
of the event:
Select Date.
Enter the date you want.
7 If you want to make the event a recurring event:
Select Repeat.
Select the repeat cycle you want.
If the event occurs more than once a week: Select
Multiple Day. Select the days you want.
Press A under Done.
Select the date you want this event to stop
recurring.
8 If you want to create reminder for this event.
Select Reminder.
Select the reminder time you want. -or-
Select Custom to enter a reminder time.
Note: If an event has no start time, you can not
create a reminder for it.
9 If you have entered all the information you want
for this event, press A under Done. -or-
To Next Page
Loading...
