39
basics
To set your primary and secondary text entry modes, press
-
>
Entry Setup
in a text entry view and select
Primary Setup
or
Secondary Setup
.
Tip:
WANT TO BE LOUD IN YOUR MESSAGE? Press
0
in a
text entry view to change text case to all capital letters (
T
),
next letter capital (
V
), or no capitals (
U
).
iTAP™ mode
Press
#
in a text entry view to switch to iTAP mode. If you
don’t see
j
or
p
, press
-
>
Entry Setup
to set iTAP mode as
your primary or secondary text entry mode.
iTAP mode lets you enter words using one key press per
letter. The iTAP software combines your key presses into
common words, and predicts each word as you enter it.
p
or
m
Yo u r
Secondary
text entry mode can be set to any
iTAP
p
or tap
m
mode, or set to
None
if you don’t
want a secondary entry mode.
W Numeric
mode enters numbers only.
[ Symbol
mode enters symbols only.
entry modes
To Next Page
Loading...
