Motorola LI4278 - Beep after Good Decode; Decode Illumination Indicator

5 - 6 LI4278 Product Reference Guide
Beep After Good Decode
Parameter # 38h
Scan a bar code below to select whether or not the linear imager scanner beeps after a good decode. If
selecting Do Not Beep After Good Decode, the beeper still operates during parameter menu scanning and to
indicate error conditions.
Decode Illumination Indicator
Parameter # F2h 5Bh
Scan a bar code below to select optional blinking of the illumination on a successful decode.
*Beep After Good Decode
(Enable)
(01h)
Do Not Beep After Good Decode
(Disable)
(00h)
*Disable Decode Illumination Indicator
(00h)
1 Blink
(01h)
2 Blinks
(02h)