Motorola LI4278 - Low Power Mode

5 - 12 LI4278 Product Reference Guide
Low Power Mode
Parameter # 80h
If enabled, the linear imager scanner enters a low power consumption mode after Time Delay to Low Power
Mode has expired, in which the LEDs turn off in order to conserve energy and prolong the life of the scanner.
The linear imager scanner wakes when it senses a trigger pull or when the host attempts to communicate.
If disabled, power remains on after each decode attempt.
NOTE The linear imager scanner does not go into low power mode when it is seated in the cradle.
Disable Low Power Mode
(00h)
*Enable Low Power Mode
(01h)