12 - 58 Symbol LS2208 Product Reference Guide
Bi-directional Redundancy
Enable Bi-directional Redundancy for added security to linear code type security levels. When enabled, a bar code
must be successfully scanned in both directions (forward and reverse) before reporting a good decode.
Enable Bi-directional Redundancy
*Disable Bi-directional Redundancy
Intercharacter Gap Size
The Code 39 and Codabar symbologies have an intercharacter gap that is typically quite small. Due to various bar
code printing technologies, this gap can grow larger than the maximum size allowed, preventing decode. If this
occurs, select Large Intercharacter Gaps to tolerate these out-of-specification bar codes.
*Normal Intercharacter Gaps
Large Intercharacter Gaps
To Next Page
Loading...
