MODELS:
MBP27T,
MBP27T/1,
MBP27T/2,
MBP27T/3,
MBP27T/4
QUICK START GUIDE
For a full explanation of all features and instructions, please refer to the User’s Guide.
1. Setting up your digital baby monitor
Connect the small plug of
the power adapter to the
baby unit and the other end
to the electrical outlet.
Only use the enclosed
adapter (6V DC / 500mA).
A. Connecting power supply for the Baby unit
Insert the wire tab of the
rechargeable battery pack
into the contact slot as
shown above and fit the
battery pack into the
compartment.
B. Installing the battery pack for the Parent unit
Black
Red
Small cross head or
Flat end screw driver.
C. Fastening the cover for the Parent unit
Connect the small plug of
the power adapter to the
parent unit and the other
end to the electrical outlet.
Only use the enclosed
adapter (6V DC / 500mA).
D. Connecting power supply for the Parent unit
POWER
WARNING:
STRANGULATION HAZARD - Keep the unit and adapter cord more than 3 feet from the cot and out of baby's reach.
NEVER place camera or cords within the cot. Secure the cord more than 3 feet away from baby's reach.
Never use extension cords with AC Adapters. Only use the AC Adapters provided.
To Next Page
Need help?
General
