Motorola MBP43 - Alarm; Camera Control; Add (Pair) a Camera; View a Camera

Parent Unit Menu Options 15
ENGLISH
4.5 Alarm
1. Press the M Menu button and the menu bar will pop up.
2. Press the
< LEFT button or > RIGHT button until A is highlighted.
3. Press the
+ UP button or - DOWN button to select the alarm time ( 6h , 4h ,
2h ). (The default setting is Alarm .)
If an alarm is set, the parent unit will beep for about 45 seconds after every
6, 4 or 2 hour period, and the alarm icon will flash red.
4.6 Camera Control
4.6.1 Add (pair) a camera
1. Press the M Menu button and the menu bar will pop up.
2. Press the
< LEFT button or > RIGHT button until C is highlighted, and
the /
+// menu will pop up.
3. Press the
+ UP button or - DOWN button to select +, and press the OK
button to confirm.
4.
C 1 / C 2 / C 3 / C 4 will pop up, press the + UP button or - DOWN
button to select the desired CAM, and press the OK button to start
searching for a camera unit. The green audio level LED will flash rapidly
while searching.
5. Press and hold the PAIR button under the baby unit until the parent unit
finds the camera, beeps and the camera picture appears.
NOTE
A camera can only be registered to one parent unit at a time.
4.6.2 View a camera
1. Press the M Menu button and the menu bar will pop up.
2. Press the
< LEFT button or > RIGHT button until C is highlighted and the
/
+// menu pops up.
3. Press the
+ UP button or - DOWN button to select , and press the OK
button to confirm.
4.
C 1 / C 2 / C 3 / C 4 will pop up, press the + UP button or - DOWN
button to select desired CAM, and press the OK button to view the picture
from that camera.
TIP
Press OK repeatedly for a quick way to View cameras without the menu.