Motorola MBP482 - Adjust the LCD Brightness of the Parent Unit; Set the Alarm on the Parent Unit; Monitor the Temperature; Temperature Format

13 Using Your Baby Monitor
3.5 Adjust the LCD brightness of the Parent Unit
You can adjust the brightness of the Parent Unit screen from Level 1 to Level 5 .
1. Press when the Parent Unit is in camera viewing mode.
is
displayed.
2. Press
or to adjust the brightness.
3. Press O to confirm your selection.
3.6 Set the alarm on the Parent Unit
You can use the Parent Unit to set the alarm as a reminder for you to take care of
your baby.
Turn on and set the alarm when it is currently off:
1. Press when the Parent Unit is in camera viewing mode.
2. Press < or to scroll to .
3. Press
or to choose On , then press O.
4. Press
or to choose 2h , 3h , 4h , 5h or 6h .
5. Press O to confirm your selection.
Turn off the alarm when it is currently on:
1. Press when the Parent Unit is in camera viewing mode.
2. Press < or to scroll to .
3. Press
or to choose Off .
4. Press O to confirm your selection.
3.7 Monitor the temperature
Your Baby Unit measures the surrounding temperature (0-50 +/-2 °C: 32-122 +/-
4°F). You can change the settings for the temperature format as follows.
3.7.1 Temperature format
You can choose to display the temperature in °F or °C.
1. Press when the Parent Unit is in camera viewing mode.
2. Press < or to scroll to .
3. Press
or to choose °F or °C .
4. Press O to confirm your selection.