Procedure for Resetting the Camera 43
ENGLISH
5. Procedure for Resetting the Camera
Note: If your Camera is moved from one router (e.g. home) to another (e.g.
office) or you have Camera setup issues, then this Camera must be reset. Please
reset the Camera with the following procedure:
1. Slide the ON/OFF switch to OFF.
2. Press and hold the PAIR button then slide the ON/OFF switch to ON.
3. Release the PAIR button when you hear a confirmation beep and wait for
Camera to compete internal reset procedure, the LED indicator will turn
red and flashes slowly when Camera is reset successfully.
4. You can add your Camera again by following the steps in section 3.2.4 for
Android devices or section 3.3.4 for iOS devices.
To Next Page
Loading...
