Getting Started 1 - 5
Installing the Secondary SIM Card
The MC959B configuration contains a secondary SIM slot on the radio module under the keypad.
To install the secondary SIM card:
1. Press the Power button to suspend the MC9500-K.
2. Wait for red Decode LED to turn on and then turn off.
3. Unhook the handstrap.
4. Remove the battery.
5. Remove and discard the two screws securing the keypad.
Figure 1-7
Keypad Removal
6. Slide the keypad down toward the bottom of the MC9500-K and then lift.
7. Loosen the two screws securing the SIM Card cover.
NOTE MC959B configuration only.
NOTE For more information about SIM cards, refer to the service provider's documentation.
To Next Page
Loading...
