Configuration Manager
Most MG7540 users never use the Configuration Manager. Here are some reasons
for using the Configuration Manager:
You want to change the wireless router setup. For instance, maybe you’re
replacing a router and want to use your existing Wireless Network Name(s) and/or
Password(s) instead of the unique ones that come with the MG7540.
You want to set up special Internet gaming settings.
You want to set up parental controls including white lists and/or black lists for
certain users and times.
You want to get performance information about the MG7540 modem and/or
built-in router. This can be helpful in optimizing wireless performance.
If you need to access the MG7540 Configuration Manager, open your Web
browser. Type http://192.168.0.1 in the address bar and press the Enter key.
In the login dialog box, type the following User Name and Password in lower case,
then click OK.
User Name: admin
Password: motorola
The status page will appear. If the Status page doesn’t appear, please see the
Troubleshooting Tips below.
For details about the Configuration Manager, please see Chapter 6 in this
manual.
To Next Page
Loading...
