Front Panel Lights
During Power up, the lights will blink for about a minute.
LIGHT COLOR DESCRIPTION
Power
Green
ON: MG7550 power on
OFF:
MG7550 power off
Upstream
Green or
Blue
Green Blinking:
Ranging in progress
Green ON:
Connected on 1 channel
Blue Blinking:
Negotiating bonded channel(s)
†
Blue ON:
Bonded with 2 or more channels
O
FF: Upstream not connected
Downstream
Green or
Blue
Green Blinking:
Scanning for DS channel
Green ON:
Connected on 1 downstream channel
Blue Blinking:
Negotiating bonded channel(s)
†
Blue ON:
Bonded with 2 or more channels
Online
Green
Blinking: Trying to go online
ON: Online
O
FF: Offline
1 2
3 4
Ethernet
LAN ports
Green or
Amber
Blinking: Ethernet data is flowing
Green:
Connected at highest LAN speed, 1 Gbps
Amber: Connected at 10 or 100 Mbps
O
FF: No connection
2.4 GHz
WLAN
Green
Blinking: Data is flowing
ON: 2.4 GHz Wi-Fi is enabled
O
FF: 2.4 GHz Wi-Fi is not enabled
5 GHz
WLAN
Green
Blinking: Data is flowing
ON: 5 GHz Wi-Fi is enabled
O
FF: 5 GHz Wi-Fi is not enabled
WPS
Green
Blinking: WPS is in discovery mode
ON: Light will remain solid after
WPS configuration is successful
†
If a blue light blinks continuously, this indicates partial service (at least one designated channel has not
completed bonding). You should still get high Internet speeds, but your service provider may want to know
so they can adjust their network.
To Next Page
Loading...
