Motorola MOSCAD-M - Page 25

The MOSCAD-M Unit
21
Hardware Test Page LED Functions
The following table describes the functions of the diagnostic LEDs when set to the Hardware
Test (Page 6) toggle or display (CPU and IO3 LEDs on). The LEDs are controlled by the
Hardware Test utility of the MOSCAD-M Configurator.
Name On/Off Function/Indication
CPU On
IO1 Off
IO2 Off
IO3 On
LED 1 On Hardware Test Controlled
LED 2 On Hardware Test Controlled
LED 3 On Hardware Test Controlled
LED 5 On Hardware Test Controlled
LED 6 On Hardware Test Controlled
LED 7 On Hardware Test Controlled
LED 9 On Hardware Test Controlled
LED 10 On Hardware Test Controlled
LED 11 On Hardware Test Controlled
LED 13 On Hardware Test Controlled
LED 14 On Hardware Test Controlled
LED 15 On Hardware Test Controlled