EasyManua.ls Logo

Motorola Moto E20 - See what’s using your battery; Use battery saving modes

Motorola Moto E20
199 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2. Go to Settings > Network & internet > Hotspot & tethering.
3.
Touch Wi-Fi hotspot and turn it on , then plug in your phone to charge. Using the hotspot really
drains the battery!
When your hotspot is active, you'll see in the status bar.
4. Set up the connection.
To connect Do this
A phone a.
On your phone, next to the hotspot's name, touch and unlock if prompted.
b. Use the other phone's camera to scan the QR code that provides the password.
Other device a. Open the device’s Wi-Fi settings.
b. Select your phone’s hotspot.
c. Enter the hotspot password. Learn how to find the hotspot's password.
Tip:
The first time you turn the hotspot on, is added to quick settings. After that, just swipe the status bar
down and touch to turn the hotspot off/on.
Manage hotspot connections
To see the number of devices connected to your hotspot:
In quick settings, look below .
Or, go to Settings > Network & internet > Hotspot & tethering and look under Wi-Fi hotspot.
To limit the number of allowed connections:
1. Go to Settings > Network & internet > Hotspot & tethering.
2. Touch Wi-Fi hotspot > Advanced > Max Connections.
3. Select a number.
Control who can connect
You can limit who can connect to your hotspot with its password or QR code:
Normal Mode: Allow any device to connect.
White List Mode: Only allow devices to connect if they're on your list.
To switch modes:
1. Go to Settings > Network & internet > Hotspot & tethering.
2. Touch Wi-Fi hotspot > Advanced and turn White List Mode on or off.
To add a device to your whitelist:
Network and internet
120

Table of Contents

Other manuals for Motorola Moto E20

Related product manuals