Motorola Moto E20 - Show battery percentage in status bar

1. Go to Settings > Network & internet > Hotspot & tethering.
2. Touch Wi-Fi hotspot.
3. Add devices:
•
If the device is already connected, touch it and touch ADD WHITELIST.
•
Otherwise, touch + Manually Add WhiteList Device, type a name and the device's MAC address,
then touch ADD WHITELIST.
The added device will appear in your list.
To remove a device from the list, touch it, then touch Remove.
Block a connected device
1. Go to Settings > Network & internet > Hotspot & tethering.
2. Touch Wi-Fi hotspot.
3. Touch the connected device, then touch BLOCK.
The device is disconnected from the hotspot and will not be able to reconnect.
Disconnect everyone
To disconnect all devices and prevent them from reconnecting:
1. Turn the hotspot off.
2. Change the password.
3. Turn the hotspot back on to continue using it.
View or change hotspot password
1. Go to Settings > Network & internet > Hotspot & tethering.
2. Touch Wi-Fi hotspot.
3. Touch Advanced > Hotspot password to see the current password.
4. To change the password, type over the current password.
Note: Although you can turn off passwords for your hotspot, keeping a password prevents unauthorized
usage of your cellular data.
USB tethering
To connect a device to the internet using your phone's cellular data and a USB cable:
1. Check that cellular data is on. If cellular data is off, your phone doesn't have an internet connection to
share.
2. Connect your phone to your computer with a USB cable.
3. On your phone, go to Settings.
4. Touch Network & internet > Hotspot & tethering.
5. Turn on USB tethering to start the connection.
You'll see in your notifications.
Network and internet
121