EasyManua.ls Logo

Motorola Moto e5 Cruise - Connect, share & sync; Connect with Wi-Fi

Motorola Moto e5 Cruise
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Connect, share & sync Connect, share & sync
Connect, share & sync
Connect accessories, computers, networks, and more.
Connect with Wi-Fi
Turn Wi-Fi power on/o
Find it: Swipe up > Settings > Network & Internet > Wi-Fi, then tap the switch to turn it on
When Wi-Fi is on, your phone automatically reconnects to available networks it has used before.
Note: You can also turn Wi-Fi on and o in Quick settings.
Connect to networks
To find networks in your range:
1 Swipe up > Settings > Network & Internet > Wi-Fi.
2 With Wi-Fi turned on, tap a found network to connect to it. When connected, you’ll see in the
status bar.
Note: If you see a question mark in the Wi-Fi status indicator
, swipe the status bar down, tap the
network, and enter the network’s password.
Wi-Fi hotspot
Your can make your phone a Wi-Fi hotspot to provide portable, convenient Internet access to other
Wi-Fi enabled devices. Your phone turns o Wi-Fi and uses the mobile network for Internet access.
This feature may require an additional subscription service from your service provider.
Find it: Swipe up
> Settings > Network & Internet > Hotspot & tethering, then tap Portable
Wi-Fi hotspot
Note: These steps may vary depending on your network.
1 Tap Set up Wi-Fi hotspot to set up security:
Network name: Enter a unique name for your hotspot.
Security: Select the type of security you want: None or WPA2 PSK. For WPA2 PSK, enter a
unique password (8 characters) that others will need to access your Wi-Fi hotspot.
Note: To protect your phone and hotspot from unauthorized access, set up hotspot security
(WPA2 is the most secure), including a password.

Table of Contents

Other manuals for Motorola Moto e5 Cruise

Related product manuals