Motorola Moto G – Disassemble Guide
Page 4 of 7
hp://www.fixez.com/
Now, locate the locking socket for the display assembly
ribbon cable. To release the cable, lift the opposite side
of the locking socket 90 degrees. You can now
disconnect the ribbon cable.
7.
The ribbon cable for the display assembly is secured to
the motherboard with adhesive. Utilize the heat gun to
soften the adhesive, making it easier to pry up the
cable from the motherboard.
8.
Next, utilize the flat side of the nylon spudger to
carefully remove the motherboard. Gently work the
spudger between the motherboard and the display
assembly/front housing to remove it from the Moto G.
9.
To Next Page
Loading...
