Motorola Moto G - Page 5

Motorola Moto G – Disassemble Guide
Page 5 of 7
hp://www.fixez.com/
The earpiece speaker is secured in its location with a
small amount of adhesive. Use your fine tip curved
tweezers to easily remove it from the Motorola
smartphone.
10.
At this time, the display assembly (LCD & touch screen)
is fused together and cannot be separated. It is secured
to the front housing/frame of the smartphone with a
generous amount of adhesive that will require heat and
patience to separate.
This procedure is only recommended on a Moto G
with a damaged screen that requires replacement.
Use the heat gun to begin warming up the adhesive
securing the LCD & touch screen digitizer assembly to
the smartphone’s front housing/frame.
11.
To begin separation of the display assembly from the
Moto G front housing/frame, securely grip the sides of
the smartphone and slip the precision knife under the
display assembly.
12.
Earpiece Speaker
Display Assembly (LCD & Touch Screen Digizer)