Preparing Your Radio for Use
English
3
Attaching the Antenna
With the radio turned off, set the
antenna in its receptacle and turn
clockwise.
To remove the antenna, turn the
antenna counterclockwise.
Attaching the Belt Clip
Align the grooves on the clip
with those on the battery and
press downwards until you
hear a click.
To remove the clip, press the
belt clip tab away from the
battery using a key. Then
slide the clip upwards and
away from the radio.
If the antenna needs to be replaced, ensure that only
CP200d antennas are used. Neglecting this will
damage your radio. See Antennas on page 34 for a
list of available antennas.
To Next Page
Loading...
