the transmitting radio releases the PTT button,
indicating the channel is free for you to respond.
Press the PTT button to respond.
If there is no voice activity for a predetermined
period of time, the call ends.
Making a Phone Call
Note: When you attempt to make or end a Phone
Call without the access and deaccess codes
preconfigured, the attempt fails and a negative
indicator tone sounds.
1 Press the programmed One Touch Access
button to make a Phone Call to the predefined ID.
If the entry for the One Touch Access button is
empty, a negative indicator tone sounds.
If the call-setup is successful, the DTMF tone
sounds. You hear the dialing tone of the telephone
user.
If the call-setup is unsuccessful, a negative
indicator tone sounds and the Phone Call attempt
fails. Repeat Step 1.
2 Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
3 Press the PTT button to talk and release it to
listen.
4 Press the programmed Phone Exit button to end
the call.
If the end-call-setup is successful, a tone sounds
and your radio exits the Phone Call.
If the end-call-setup is unsuccessful, a negative
indicator tone sounds, and your radio returns to
the Phone Call. Repeat Step 4 or wait for the
telephone user to end the call.
Making a Private Call with a One Touch Call Button
The One Touch Call feature allows you to easily
make a Private Call to a pre-defined Private Call alias
or ID. This feature can be assigned to a short or long
programmable button press.
You can ONLY have one alias or ID assigned to a
One Touch Call button. Your radio can have multiple
One Touch Call buttons programmed.
1 Press the programmed One Touch Call button to
make a Private Call to the pre-defined Private Call
alias or ID.
Making and Receiving Calls in Non-Connect Plus Mode
31
English
To Next Page
Loading...