Motorola MOTOTRBO DP1400 - Attaching the Antenna; Removing the Belt Clip

Ensure that the radio is turned off.
Set the antenna in the receptacle and turn clockwise.
NOTICE:
To remove the antenna, turn the antenna
counterclockwise.
CAUTION:
If the antenna must be replaced, ensure that only
MOTOTRBO antennas are used. Neglecting this
damages your radio. See Antenna for a list of
available antennas.
Attaching the Belt Clip
Follow the procedure to attach the belt clip to your radio.
Align the grooves on the clip with those on the
battery and press downwards until you hear a click.
Removing the Belt Clip
Follow the procedure to remove the belt clip from your
radio.
1 To remove the clip, press the belt clip tab away from
the battery using a key.
2 Slide the clip upwards and away from the radio.
English
Send Feedback 23