Viewing a Saved Text Message
1 Access the Text Message feature.
Radio Controls Steps
Programmed
Text Message
button
Press the programmed Text
Message button.
Menu
1
to access the menu.
2
or to Messages
and press to select.
2
or to Drafts and press to select.
3
or to the required message and press
to select.
Editing and Sending a Saved Text Message
1
Press again while viewing the message.
2
or to Edit and press to select.
A blinking cursor appears.
3 Use the keypad to type your message.
Press to move one space to the left. Press or
the key to move one space to the right.
Press the key to delete any unwanted
characters. Long press
to change text entry
method.
4
Press
once message is composed.
5 Select the message recipient by
•
or to the required alias and press
to select.
•
or to Manual Dial, and press to
select. The first line of the display shows
Number:. The second line of the display shows
Advanced Features in Connect Plus Mode
230
English
To Next Page
Loading...