strength, and displays the battery charging icon
and battery strength level.
See LED Indicator on page 24 for more
information.
• The On/Off/Information button is used to check
the Received Signal Strength Indicator (RSSI)
signal strength and battery strength when the
radio is powered on, charging or not.
Short press the On/Off/Information button when
the radio is powered on. The radio plays the
battery strength announcement voice message,
shows the LED indicator of the battery strength,
and displays the RSSI icon and battery strength
level.
See LED Indicator on page 24 for more
information.
• The On/Off/Information button is used to check
the radio name when the radio is powered on.
Short press the On/Off/Information button twice
when the radio is powered on. The radio displays
the radio name.
Switching Between Conventional Analog and
Digital Mode
Each channel in your radio can be configured as a
conventional analog or conventional digital channel.
Use the Channel Rocker ( ) to switch between an
analog or a digital channel.
To Next Page
Loading...