• Turn the radio off and power it on again.
• Change the channel via the Channel Rocker.
• Press the programmed VOX button to toggle the
feature on or off.
Note: Turning this feature on or off is limited to radios
with this function enabled. Check with your dealer or
system administrator for more information.
Turning the Radio Tones/Alerts On or Off
You can enable and disable all radio tones and alerts
(except for the incoming Emergency alert tone) if
needed.
Press the programmed All Tones/Alerts button.
Tone heard ... Indication
Positive Indicator tone All tones and alerts are
ON.
Negative Indicator tone All tones and alerts are
OFF.
Checking the Battery Strength
You can check how much battery power you have
left.
Press the On/Off/Information button to view the
battery strength via the LED indicator.
LED indicator Indication
Blinking Red Radio has a low battery
charge.
Solid Yellow Radio has a fair battery
charge.
Solid Green Radio has a full battery
charge.
See On/Off/Information Button on page 21 for more
information.
Checking the RSSI Values
Your radio shows the Received Signal Strength
Indicator (RSSI) icon and signal strength on the
display.
Press the On/Off/Information button to view the
RSSI values on the display.
The number of bars displayed represents the radio
signal strength. Four bars indicate the strongest
signal. This icon is only displayed while receiving.
To Next Page
Loading...