Chapter 4 Radio Programming and Tuning
4.1 Introduction
This chapter provides an overview of the MOTOTRBO Customer Programming Software (CPS), as
well as the Tuner and AirTracer applications, which are all designed for use in Windows 7 and
Windows 8 environment. These programs are available in one kit as listed in Table 4-1. An
Installation Guide is also included with the kit.
4.2 Customer Programming Software Setup
The CPS programming setup, shown in Figure 4-1 is used to program the radio.
Figure 4-1. CPS Programming Setup
NOTE
Refer to the appropriate program on-line help files for the programming procedures.
Table 4-1. Software Installation Kits For Radio Tuning Setup
Description Kit Number
Customer Programming Software on DVD-ROM GMVN5141_
NOTE
Refer to the appropriate program on-line help files for the programming procedures.
Computer USB ports can be sensitive to Electrostatic Discharge. Do not touch
exposed contacts on cable when connected to a computer.
NOTE
(*) This cable will be replaced with CB000262A01, once the existing stock has been
depleted.
Micro USB Programming Cable
(CB000262A01, *25-124330-01R, PMKN4128_)
Battery
Radio
To Next Page
Loading...
