This is done by automatically increasing the alarm tone
volume over time. This feature is known as Escalert.
Call Alert Operation
Call Alert paging enables you to alert a specific radio user
to call you back.
This feature is accessible using a programmed One Touch
Access button.
Responding to Call Alerts
Follow the procedure to respond to Call Alerts on your
radio.
When you receive a Call Alert:
• A repetitive tone sounds.
• The yellow LED blinks.
Press the PTT button within four seconds of
receiving a Call Alert page to respond with a Private
Call.
Making Call Alerts
Follow the procedure to make Call Alerts on your radio.
1 Press the programmed One Touch Access button.
The display shows Call Alert and the subscriber
alias or ID. The green LED lights up.
2 Wait for acknowledgment.
If the Call Alert acknowledgment is received, the
display shows a positive mini notice.
If the Call Alert acknowledgment is not received, the
display shows a negative mini notice.
Emergency Operation
An Emergency Alarm is used to indicate a critical situation.
You are able to initiate an Emergency at any time even
when there is activity on the current channel.
Your dealer can set the duration of a button press for the
programmed Emergency button, except for long press,
which is similar with all other buttons:
English
Send Feedback 41
To Next Page
Loading...
