Motorola MOTOTRBO SL1600 - Sending Emergency Alarms with Call

• The display shows ALRM.
2 Wait for acknowledgment.
If successful:
• The Emergency tone sounds.
• The green LED blinks.
If unsuccessful after all retries have been exhausted:
• A tone sounds.
The radio exits the Emergency Alarm mode.
Sending Emergency Alarms with Call
This feature allows you to send an Emergency Alarm with
Call to a group of radios. Upon acknowledgement by a
radio within the group, the group of radios can
communicate over a programmed Emergency channel.
Follow the procedure to send Emergency Alarms with call
on your radio.
1 Press the programmed Emergency On button.
The green LED lights up.
2 Wait for acknowledgment.
If successful:
• The Emergency tone sounds.
• The green LED blinks.
3 Press the PTT button to make the call.
The green LED lights up.
4 Release the PTT button to listen.
5
If the Channel Free Indication feature is enabled,
you hear a short alert tone the moment the
transmitting radio releases the PTT button, indicating
the channel is free for you to respond. Press the PTT
button to respond to the call.
English
Send Feedback 43