2
or to Drafts and press to select.
3
or to the required message and press
to select.
4
Press again while viewing the message.
5
or to Delete and press to delete the
text message.
Managing Fail-to-Send Text Messages
You can select one of the following options while at
the Resend option screen:
• Resend.
• Forward.
• Edit.
Note: If the channel type (i.e. conventional digital or
Capacity Plus or Linked Capacity Plus) is not a
match, you can only edit and forward a Fail-to-Send
message.
Resending a Text Message
Press to resend the same message to the
same subscriber/group alias or ID.
If the message is sent successfully, a tone sounds
and the display shows the positive mini notice.
If the message cannot be sent, the display shows
the negative mini notice.
Forwarding a Text Message
Select Forward to send the message to another
subscriber/group alias or ID.
1
or to Forward and press to select.
2 Select the message recipient by
•
or to the required alias or ID and press
to select.
•
or to Manual Dial, and press to
select. The first line of the display shows Radio
Number:. The second line of the display shows
Advanced Features in Non-Connect Plus Mode
100
English
To Next Page
Loading...